
From the Nystrom Performance Library
Shop Tips from Ford — November 1963 (Vol. 1, No. 2)
Loading document…
- Make
- Ford
- Model / application
- Ford cars and civilian light trucks; see issue-specific applications
- Document type
- Technical Service Bulletin
- Pages
- 16
Inside this document
Hydraulic tappet noise diagnosis and oil-aeration testing
Carburetor percolation and excessive fuel-line pressure remedies
Automatic-choke heat retention and heater-hose modifications
Fordomatic and Cruise-O-Matic clutch snap-ring service corrections
Transistor-ignition distributor testing and tachometer wiring
Falcon exhaust clearance, generator splash protection, and axle bolt torque revisions
Turn-signal, fuel-line vibration, radio-control, and instrument-gauge repairs
427 high-performance engine specifications and original service-parts reference
About this scan
All 16 original issue pages and contents entries were checked. Approximately 150 effective PPI; readable online with zoom, but not certified print-ready. Original wear, dealer markings and varying page sizes retained. No synthetic sharpening or reconstructed text.
Source and reproduction status
https://www.mustangtek.com/Library6/PDF/ShopTips1-2.pdf
Research reviewed 2026-10-29 for this exact Shop Tips from Ford — November 1963 (Vol. 1, No. 2). Complete original issue identifies Ford Division, Dearborn, Michigan and general free dealer distribution. Fresh official Copyright Office CPRS title/claimant searches and January 2026 complete renewal data found no matching renewal; unrelated Ford records were inspected and excluded. No copyright notice or separately credited protected contribution was identified in all-page review. Original registration was not located. This is a research-supported U.S. nonrenewal conclusion, not Ford permission, legal certification, or worldwide rights clearance. Modern reprints are not the source.